Valve Core Removal Tool - 5/16in

ASK YOUR PREFERRED LOCAL DISTRIBUTOR FOR APPION PART# MGAVCR

(No reviews yet) Write a Review
UPC:
818369010055
Fitting Size:
5/16in Female Flare to 1/4in Male Flare

Vacuum-Rated Valve Core Removal Tool for 5/16in Ductless Systems

Valve cores effect refrigerant recovery and system evacuation times significantly. Always remove valve cores from the system for Full Flow

Features and Benefits

  • Vacuum-Rated to 20 microns
  • Full Flow for high speed recovery and evacuation
  • Double O-Ring ball valve seal for accurate "blank off" vacuum testing
  • 1/4" side port for service gauges
  • Designed for high pressure refrigerants including R410a
  • Magnetic Base - Never loose a stem again
  • Adjustable Tip - Grab all cores with confidence

Why Remove Valve Cores?

Valve cores are designed to restrict flow and minimize refrigerant loss. Up to 90% of the access port can be restricted by a valve core. Removing them maximizes flow and can save hours on any job.

Hot Tanks and Slow Recovery?

A valve core acts like an expansion valve, turning liquid refrigerant into vapor and superheating the refrigerant. This causes the tank to heat up and leads to painfuly slow recovery times.

Tired of Slow Evacuations?

Evacuating through a valve core and core depressor can reduce the potential flow of any vacuum pump to as little as 0.2CFM.

Are your Tools Rated for Vacuum and Pressure?

All Appion Valve Core Removal Tools are Vacuum-Rated to 20 microns and designed for high pressure refrigerants, such as R410A. This will give you the peace of mind that your tools aren't going to leak in a deep vacuum or during critical parts of the recovery process.

Additional Product Material

Technical Bulletins

Always wear gloves and eye protection and follow proper safety practices when handling refrigerant.

For California Consumers:

 

ONLY AVAILABLE FROM YOUR PREFERRED LOCAL DISTRIBUTOR.

ASK FOR APPION PART# MGAVCR

Click Here to search for your local distributor